Category: Fabs Lab

  • Voxengo – VariSaturator

    Hey Labfans! Today I’ll be analyzing  Voxengo VariSaturator

    Some info about the unit: 

    • Strong harmonic enhancer
    • Mix saturator
    • Track saturator
    • Drum bus compressor
    • Stereo, mid-side, 5.1 processor

    Here are the settings utilized (No oversampling)(above image)

     If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    FR

      Edit Content

    Based on the settings we see  that a bright, warm  and bitty curve has formed!

    Phase

      Edit Content

    Here we see the phase that formed, its neither bad or good

    THD/THD+N

     Edit Content

    We can observe that the THD is agressive and full, also we can see that there’s plenty of it!

    DSC

     Edit Content

    Here we can also observe the envelope as well ! We can observe that very slight compression exists, very subtle!

    Consensus

    This unit delivers what it states, but also provides some great tools to manipulate the result, I have to mention that EVERY knob and setting  effects the FR and THD ! Which is a great feat!

     

     

     

     

    Fab

  • Voxengo – Shinechilla

    Voxengo – Shinechilla

    Hey Labfans! Today we will be looking at Voxengo – Shinechilla, a description from the vendor of the plugin:

    Voxengo Shinechilla is an experimental creative sound effect plug-in for professional audio and sound production applications.  Shinechilla allows you to generate and blend 2nd, 3rd and 4th harmonics with the original dry sound.  The harmonic generation process offered by Shinechilla is quite unique on the plug-in market since it produces almost no intermodulation distortion.

    User Interface (above image)

     If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    So as soon as I tried this software, it was like I had designed it myself! The idea of a tool that just did what shinechilla does floated inside my mind before I discovered it, and someone had gone and done it for me! 

    So let me put it in a simple manner, with shinechilla we can ’draw’ /create and manipulate distortion from scratch however we want ! Not only that,but all controls of shinechilla interact and effect the FR synchronous to any movement or change we might do, some effect more and some effect less. I don’t have to reach the end of the post to tell you that this plugin is an amazing tool!

    so I draw my own ‘tube’ like distortion inside the unit and will post some plots from that and explain some of the units controls!

    FR

     Edit Content

    So we can see how the FR has formed, you notice that there might be some sort of bumps but that is just away of implementation and does not create any problems.

    Phase

     Edit Content

    No phase issues

    THD/THD+N

     Edit Content

    Here is the THD I designed with the unit, subtle warm rich and smooth!

    Also the fundamental is crystal clear which is a great thing!

    Generally the units manual explains quite well the parameters, but let me point out that by utilizing the SAT window with multiple points we can drastically effect the FR and of course the THD. Also with SAT  whatever  additional harmonics we create with the other windows are added to the SAT effect.

     

    Lets have a look at DSC aswell!

    DSC

     Edit Content

     

    Consensus:

    This plugin is one of a kind!

     

    Fab

  • Voxengo – Warmifier

    Hey Labfans! Today I’ll be analyzing  Voxengo Warmifier

    Some info about the unit: 

    • Valve warming effect
    • Valve preamp simulator
    • Console coloration simulator
    • Smooth harmonic enhancer
    • Stereo, 5.1 processor

    Here are the settings utilized (No oversampling)(above image)

     If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    FR

      Edit Content

    Well based on the settings we see a wide ”warm” curve!

     

    Phase

      Edit Content

    Phase is nominal!

    THD/THD+N

     (measured in steps of I & V parameter simultaneously)

     Edit Content

    There is definitely THD content it can be subtle or not, based on the settings. Also we see that the fundamental is absolutely sterile clean, which is a very good thing for this sort of process! The THD character is warm smooth and rich!  no unwanted THD artifacts what so ever!

    DSC

     Edit Content

    Here we can also observe the envelope as well !

    Consensus

    This unit definitely does what it says it does! Not to mention you have some great controls to manipulate the unit and lots of different harmonic models to choose from!

     

     

    Personal Quote: I really liked this plugin, there are a few things like noise modeling that might have augmented it, but on the other hand the digital privileges of less noisefloor are also a good thing! As far as THD is concerned  I would have liked a bit more drastic interactions but overall can’t complain that much!

     

     

     

    Fab

  • Cytomic – The Glue

    Cytomic – The Glue

    Hey Labfans! Today I’ll be analyzing Cytomic – The Glue 

    Starting with the official info: 

    The Glue is an analog modeled compressor plug-in based on Theclassic 80’s British big console buss compressor with some additional features. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. It’s quick and easy to use and has an uncluttered interface.

     

     

     

     

    Here are the settings utilized (No oversampling)(side image)

     If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    FR

      Edit Content

    Well flat, right of the bat half the modeling is out

     

    Phase

      Edit Content

    Well since there is no FR to begin with, no phase is bound to exist either

    THD/THD+N

     (measured in threshold steps)

     Edit Content

    This time I made the animation fast, to point out something. Although to the inexperienced eye this might seem a modeling content, and I’m not saying that is not. Indeed there is THD content but what is worth observing is that the behavior is quite static in regard to the harmonics architecture behavior and generaly its interaction to the source tone. There is some movement but its very subtle, along with a low percentage aswell.

    DSC

     Edit Content

    Well here we can also observe that the knee is in between hard and soft

    Consensus

    Well as far as modeling goes and the standard we use to evaluate this, it must be considered partially modeled.

     

     

     

    Personal Quote: For me personally, its even below half due to the THD  subtle almost static  behavior (and quite minimal in percentage as well) and the absence of noise modeling.

     

     

    Fab

     

  • Slate Digital – VCC/Channel – Personal Summary

    Hey labfans so here I will make my final summary of the VCC channel. Future posts will cover the VCC master section!

    So what do we have ?

    1. 4k model: A relatively  transparent FR with some agressive distortion, bite bite bite!
    2. US A: A low end half cookie! intricate FR with some serious distortion when pushed too hot or not;) Its warm and rich and knows how and when to bite!
    3. Brit N:  A low end full cookie! with quite transparent distortion until a defined threshold that makes it go boom!
    4. Ψ : Intricate response, its rich warm fat and agressive it has a  high end sheen with a personality! Its distortion likes to go boom aswell after a certain threshold 😉
    5. RC – Tube: If it was any warmer smooth it would have started to make smoke signals!

     

    In Distortion Quantity % order (more to less)

     

    1. RC – Tube
    2. US A
    3. Brit 4 K
    4. Brit N – Ψ (its a tie)

    In  FR Intricacy (most intricate to less)

    1. RC – Tube
    2. Ψ 
    3. Brit N – US A (its a tie)
    4. Brit 4K

     

    My thoughts:

    VCC is an amazing tool, any professional (and not) should  have, if this was a private plugin I would totaly get why. But none the less this is available to all of you! Be grateful, the search for Mojo in digital format is over, get over it.

    Fabian Prezja

  • Slate Digital – VCC – RC-Tube

    Hey Labfans! Today I’ll be analyzing  Slate Digital – VCC – RC-Tube!

     

     

     

     

    Here are the settings utilized (No oversampling)(side image)

     If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    FR

     fr Edit Content

    Here is the response of the unit its its neutral state/settings, not the fr is quite interesting but the ouput gain is lowered!

    Here is the FR with input steps from min to max (input Gain – ONLY)

    fr%20input Edit Content

    Right away we can see that the variation of the FR which  again is so telling about the detail focus of the modeling! Also we can identify that, noise modeling is present aswell!

     Here is an interesting fact, the drive knob in most units has a subtle effect both in FR and THD and works in a manner of increasing/decreasing THD and ouput gain together, but things are different in this unit, look what happens when we do the same step measurement utilizing the Drive knob from min to max (input gain neutral)

    123 Edit Content

    The top line is minimum drive and the bottom line is maximum drive, what !? that’s right it’s backwards

    The more drive you add the THD icreases and the output gain decreases, while the less drive you add the THD degreases and the output increases. 

    But you already knew that right?;)

    Phase (at neutral setting)

    phase%20neutral%20state Edit Content

     nominal phase! 

    THD/THD+N

     (measured in input steps)

     

    http   makeagif.com  media 9 06 2013 AElyBx Edit Content

    No low profile here, the unit has the most distortion than all models in average, the behavior is realy tube like and the THD content also states that! The character is rich,smooth and warm for the most part! (even order as opposed to odd order) 

     PS: The interaction of the harmonics is far more complex! After all this is just a step to step GIF for demonstration purposes. Only a video capture would be able to capture a more detailed interaction.

    THD with neutral input and min DRIVE

    min%20drive%20THD Edit Content

    What this plot tells us, other than looking awesome, is that the Drive knob has a great effect on the THD content unlike the other units the Drive in this case  is very delicate and sensitive to changes!

    Thats what I call serious detail.

    Here is the same graph with the Drive Maxed – input neutral

    max%20drive%20THD Edit Content

    Note that other models in VCC would get 40% at their max input (For example), this unit gets a 40% with a neutral input and just a maxed drive! if we max both input and drive, we see…

    THD%20MAX%20ALL Edit Content

    The unit proves to have the most distortion than any of the other units!

     

    DSC

    DSC Edit Content

     Here is the envelope, well looks as it should

    Consensus

    Do I need to say it ?

    Personal Quote: This is WIN.

     

    PS:1 I will make a special post doing a summary of the VCC channel so everyone of you can have a shorter brief explanation and overview of the units 🙂

     

     

     

     

    Fab

     

  • Slate Digital – VCC – Brit N

    Slate Digital – VCC – Brit N

    Hey Labfans! Today I’ll be analyzing  Slate Digital – VCC – Brit N

     

     

     

     

    Here are the settings utilized (No oversampling)(side image)

     If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    FR

     FR Edit Content

    Here is the response of the unit its its neutral state/settings, also we can see the FR change fron 0 to +6 Input Gain

    Below is a micro-scale for identifying noise!

    noise Edit Content 

    Yes there is noise modeling!

     

     

    Phase

     ps Edit Content

    nominal phase! (the big rotation is outside the critical/audiable  range again a sign of excelent modeling)

    THD/THD+N

     (measured in input steps)

    http   makeagif.com  media 9 06 2013 pEqDaP Edit Content

    Here we can see that the unit keeps a low proffile in THD untill a certain threshold, then it explodes quite intresting behavior!

    DSC

    DSC Edit Content

     Here is the envelope, well looks as it should

    Consensus

    This is the real deal,  hands down. Again and Again…

     

     

     

     

    Fab

  • Slate Digital – VCC – US A

    Hey Labfans! Today I’ll be analyzing  Slate Digital – VCC – US – A!

     

     

     

     

    Here are the settings utilized (No oversampling)(above)

     If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    FR

     FR Edit Content

    Here is the response of the unit its its neutral state/settings, interesting and intricate FR:)

    Below is a micro-scale for identifying noise!

    noise Edit Content

    Yes there is noise modeling!

     

    Lets see how the FR interacts with the Input Gain

    (measured in input steps from 0 to +6 )

    FR%20input%20steps%200%20to%20%2B6 Edit Content

    Sublime! Here we can see that the input gain can affect the low end!

     

    Phase

     phase Edit Content

    No phase issues!

     

    THD/THD+N

     (measured in input steps)

    http   makeagif.com  media 9 06 2013 d1xHjJ Edit Content

     That’s what I like to call, attention to detail. The architecture of the THD relationships is very unique, that dictates a very sophisticated method of modeling THD! 

    The character of the distortion by itself and in relation to the FR  is  warm, smooth & aggressive.

    PS: The interaction of the harmonics is far more complex! After all this is just a step to step GIF for demonstration purposes. Only a video capture would be able to capture a more detailed interaction.

    DSC

    dsc Edit Content

     Here is the envelope, well looks as it should, although I have to note that again attention to detail is present! look at the very top of the envelope theres a little nuincanse there, even that part is modeled…

    Consensus

    This is the real deal,  hands down. Again…

     

     

     

     

    Fab

     

  • IK Multimedia – T-Racks Model 670

    Hey Labfans! Today I’ll be analyzing  IK Multimedia – T-Racks Model 670

     

     

     

    Here are the settings utilized (No oversampling)(above)

    If you are new to the lab post ,read this https://www.gearevu.littlefishaudio.com/must-read-welcome-to-my-lab-updated/

    FR

    FR Edit Content

    Right off the bat we can observe there is some minimal L/R difference, also some fr content, there is no additional noise for the unit.

    Phase

    phs Edit Content

    looking good! No phase issues

     

    THD/THD+N

    http   makeagif.com  media 9 06 2013 mGj0SN Edit Content

    Here we can observe the THD relationships with an input min to max, step to step measurement.

    The distortion is there, its generous , and the moment compression initiates quite rich aswell!

    DSC

    DSC Edit Content

    Here is the envelope of the compression!

    Consensus

    Yes the modelling is defently there!

     

     

    Personal Quote: I’d expect a super gentel knee, but thats just me:)

     

    Q: Could this unit be used as a saturation unit aswell ?

    A:Yes, but be careful with the output!

     

     

    Fab

     

  • Waves – Renaissance Channel

    Waves Renaissance: 10 classic Waves plugins, heard on countless hit records. The warmth of analog, the precision of digitalIncludes compressors, EQ, reverbs, bass enhancement and more

    (Waves Description)