Fredenstein Bento 2 + Black Lion Audio Auteur Preamp Pair + Cables


Fredenstein Bento 2 + BLA Auteur Preamp Pair + 4x XLR-TRS Cables

LFA 10ft TRS-XLRF Cable * 

LFA 10ft TRS-XLRM Cable * 

Black Lion Audio BLA Auteur 500 Series Preamp * 

Fredenstein Bento 2 500 Series Chassis * 

Fredenstein Bento 2 + BLA Auteur Preamp Pair + XLR-TRS Cables Includes:

The Fredenstein Bento 2 is a high performance two module carrier for 500 Series modules. The unit can accept a maximum of 2 modules. The Bento 2 features several important upgrades compared with third party products. Universal power supply: Mains voltages range from 90V AC to 240V AC, 50 to 60 Hz. Increased output currents: +/-16V DC 0.9A and +48V DC 0.033A Additional TRS inputs and outputs, parallel to the XLR connectors. Built-in Audio Routing: Slot 1 can be daisy-chained to slot 2 by simply flipping a switch on the back-panel. Compressor buss linking: Compressor modules can be linked by engaging a switch on the back-panel as well. Secondary power-switch and voltage indicators are on the front-panel.

2x Black Lion Audio Auteur 500 Series Preamps! There are lots of mic preamps available these days. What makes ours so special? For one, it’s a design that’s somewhat unique in its approach. Being admirers of the fully balanced, transformerless circuits found in highly acclaimed recording consoles, we chose to use a similar topology. We began with a high speed input stage that picks up lots of detail and nuance, and then followed it with a high current output stage. We also like classic transformer-based designs because of the characteristic they lend to the audio signal. Because of this, we added a 600 ohm, M-6 silicon steel output transformer to give the audio a thick quality that’s reminiscent of a prized vintage preamp. It’s the best of both worlds in our opinion. The Auteur 500 is a single channel, 500 series preamp and features an instrument input, phase, +48VDC phantom power, and a 10dB input signal pad. SPECIFICATIONS Channels: One Gain: 0-66dB THD+Noise: -110dB @ 1 kHz Headroom: 30dB Input impedance: 8k Output impedance: 600 ohms.

2x Little Fish Audio XLR Female to TRS (Balanced 1/4 Inch) Studio Cables

2x Little Fish Audio XLR Male to TRS (Balanced 1/4 Inch) Studio Cables

These XLR to 1/4″ TRS balanced pro audio cables offer high fidelity and eliminate noise in the recording studio and on the stage. 10 feet long to make sure you have enough slack. Everything you need to get the most out of this Little Fish Audio exclusive home recording bundle!

Weight 10 lbs



Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.




A link to set a new password will be sent to your email address.

Continue as a Guest

Don't have an account? Sign Up