Author: joshlew

  • Dangerous Music – The D-Box

    Few gear manufacturers out their put out ALL of their products with true identity, passion, functionality, and phenomenal build. Dangerous Music, like very few others, get this concept. They seem to produce products that meet the needs of recording engineers in a way that few others do. One of my favorite offerings that they have had on the market for at least the last 4 years, has been the “D-Box.” With this box, ANY studio enthusiast is able to get: World Class d/a conversion, SUMMING, Talkback, Monitor Switching, multi- Source Selection (3 analog and 2 digital stereo pairs), headphone amplification.

    This box leveled the playing field. We should be grateful that this was done at a $1499 price point.

    Check out our video to see what we like about it, and how it works!

  • Is there any Better Choice in Eq than the Bettermaker 232p?

    The Bettermaker EQ 232p is one pretty beast. It’s design joins the aesthetic of early 70s vibe with year 2020 futuristic polish. With a $5995 price tag one would need to be sure that it’s feature set, function, and sonics warrant the expenditure. How much better a mix must a BetterMaker Make? The truth is that our tests and experience with the unit shows that it is a “best in ANY class” equalizer that allows the engineer to dial in, recall, and AB broad swaths of Pultec style mojo, with exacting, surgical eq, at the click of a button. The manufacturer clearly aimed to throw everything and the kitchen sink into this beast to quiet even the most petulant and persnickety among us.

    Here are some of Bettermaker’s® EQ 232P amazing features:

    10 filters (5 on each channel) based on classic designs including 2 famous Pultec sections, 2 Highpass filters and 4 parametric filters with wide frequency ranges.
    Pultec section- Shelf filters based upon legendary constructions, offered in combined, matched stereo, with all the features including separate boost and attenuation knobs.
    Full digital recall with 399 cells for your own presets.
    USB link to use the EQ’s just as you would use a plugin, including Automation.
    AU, VST, RTAS (32 & 64 bit) supported
    A/B comparing function
    Fully isolated analog and digital path for maximum separation of these two worlds.
    2 additional parallel outputs for advanced processing like parallel compression.
    7 presets to have a kick start!
    Improved 24 dB headroom.
    Additional M/S mode modification is available. M/S mode replaces the dual mono mode.

    Check out our in depth video review:

  • Classic Neve 2254 Compressor Vs Current Plugin Emulations: How does the software stackup

    The Neve 2254 compressor is widely regarded as one of the all-time great “character” compressors. It has both limiting and compression circuits and can be used in stereo or dual mono. I purchased my 2254 pair from Portugal, and promptly named her “Hot Cocoa.” I patiently waited to her left and right side custom racked by our techs. I then had them gone over by a tech to make sure that all was well with the units both individually and as a functional stereo pair. When I have used this stereo pair, I have absolutely loved it. Cocoa sounds fantabulous on Drum mults, singles sources, and even the entire 2 mix can benefit from her chocolaty .

    I have been relatively certain that even at a street price of roughly $8k, it is worth keeping cocoa around. I asked Alvaro to get down to brass tacks and evaluate in real terms, whether or not I was right. What do you think?

  • DBX Compression – 38 years “Over Easy” compression. Can I now replace my DBX 160 VU with the UAD DBX 160 vu Model?

    I began learning recording technique as an intern, assistant, and engineer at Studio Center recording studios in miami, Fl starting in june of 2002. The first compressor that I was quickly able to get fantastic results with was the DBX 160 VU. At the time it was hard wired to a Demeter VTMP tube preamp. I remember the combination sounding much larger than life, “in your face” (for lack of a better term) and exactly what the doctor ordered on most of the rappers that I was recording. I could quickly dial in intimacy or aggression for vocals, bass, and some guitar parts. This compressor has always remained one of those hardware pieces that is so good at what it does, that it has not been worth replacing with an emulation, even though they now go for roughly $800-$1100 per channel. This compressor had a attack and release settings which were determined by the rate of change of the program material itself: as the compressor traced the sound envelope it would adjust attack and release time allowing the engineer to focus on hearing compression (ratio) and amount of gain reduction. The innovation that makes these DBX compressors so smooth is the “Over Easy” initiation of compression, was introduced with the easing in of compression slowly with the softer knee of the compressor. Because I also own the 165, 160sl and several software models including Universal Audio 160VU I wanted to do gain matched, identical setting comparisons to get as close to an apples to apples comparison, to see if I could afford to replace these two beauties. What do you guys think based upon the following clips!? Keep em or lose em?

    Feel free to import the clips into a session to listen at your own leisure.
    Here is the PDF Manual for the original 160 VU.
    dbx_160

    Josh Lewis

  • Compression Tutorial Videos: Learn how to mix with Compression

    [youtube=http://www.youtube.com/watch?v=JU9ja60JNcw&feature=share&list=PLhdeKtcwASnBjhPVhczf_Kfyz1FUBrLoN&index=1]

    It has taken me years to begin to feel somewhat comfortable using one of the most essential tools in the recording engineers arsenal: Compression. There is no way to get that hyper present, in your face quality in modern music without it. Learning to shape sound envelopes, controlling dynamics, to maximize impact takes a lot of trial and error. Learn Compression Ratio, Threshold, Attack Release, and the characteristics of different compressor/limiter topologies.

  • Compression for mixing: Relating to its use as an ADSR envelope shaper

    Basic compression tip: Thinking of a compressor as an ADSR (Attack Delay sustain release) envelope shaper. Look at the blobs of sound on the track you would like to reshape with a compressor. 1) With selector tool measure how long the sound takes to get from zero to peak in milliseconds. Set your compressors attack to this time. 2) Now, measure how long it takes this blob to decay. Set your release to this time. You have now defined your sounds envelope. 3) Now choose what you will be using to shape the envelope: a sledgehammer (Ratio of 8:1 or greater) or a sander (1.5:1-4:1). 4) Choose the force with which you will be using this tool by dialing in your threshold. Lower it for greater compression. 5) Make up gain: Look at gain reduction meter and raise the gain somewhat to make up for the loss in level. Good job! Now you may shape envelope further by adjusting your attack and release settings. Release will only need to be shortened usually.

  • Microphone Selection and placement Trumps all other gear choices?

    There is no more appropriate place to start speaking about recording studio equipment choices than the microphone. As an engineer first and owner of a retail company, I interact with hundreds of recordists, artists, and music producers every year, with varying degrees of training and professional success. From multiplatinum artists to weekend warrior hobbyists, newbies in their dorm room to Grammy winning engineers; many seem to be forgetting this fact: proper microphone selection is king. The answer to the oft-asked question, “how do I get a better sound?”  Lies in how the sounds are captured. If instrumentation and arrangement have been made to the best of your ability, now it is time to capture your instruments just as you envision.

     

    You’d like sweet and creamy bass? Hot and chocolaty toms? Loose and limber mellowing agent needed on your high hat? Agitated, slightly compressed cutting vocals? Roomy atmospheric backing vocals? Nearly all of the character that you need for your source can be captured with judicious microphone selection and placement.

     

     

    The microphone is the primary instrument used to capture the essence of a sound source. Shaping the timbre of a source to fit within the context of a larger musical framework can, and most times should be made at the onset. Like a choice of lens, for angle and depth of field in photography, what better place to start by capturing the overall energy and timbre of the source properly than at the onset? Of course this choice requires vision, forethought, planning, trial and error, which can seem daunting to the untrained engineer. Is all of this effort choosing the right microphone truly worthwhile? Many budding engineers hope to skip this vital initial step, which seems to have somehow been marginalized by the overwhelming myriad of hardware and software processors available. How have we as engineers been led so far astray?

     

    There are likely many contributing factors to these phenomena, so lets take them one at a time. First, marketplace and profit motive: manufacturers of gear would like you to purchase their gear! There are at least 25 software or hardware based processors released for every one microphone. If you were getting it right the first time with a microphone, retailers would certainly have much less to sell to you! “Are you telling me that you don’t have our latest and greatest nickel tranny, chicken head knob festooned, Bakelite bejeweled, made in china, designed in Germany, with good old American marketing, “suck removal” tool for your mixes?” This hype engenders something that most all of us fall prey too: gearlust.

     

    I propose that this obsession with gear has biological, psychological, and social underpinnings, which we are not conscious of. I must confess that I too have been completely prey to the following at one point or other:

     

    • Keeping up with the Jones’
    • Magical thinking (this purchase will fix everything)
    • Gear Envy
    • Laziness
    • Lack of education and field experience

    These are all poor reasons to make a gear purchase. The following are clips taken at a symposium that LFA did at SAE Miami, where we tracked the same vocalist on a wide range of microphones, costing between $199, and $25,000k. The differences are not subtle. Perhaps each would be an excellent choice for a different source. Each has its own unique ability to accentuate different qualities in the source. Which is your choice? Is price a clear determinate of how well suited a microphone will be to it’s source?

    Vocal – Telefunken M80

    Vocal – Shure KSM

    Vocal – Peluso P12

    Vocal – Fathead II

    Vocal – Brauner VM1 KHE

    Vocal – Blue

    Vocal – Avantone Ribbon

    Vocal – Avantone BV12

     

    Because there are a myriad of microphone designs, with pickups and circuit topologies of all sorts, I think it is a good idea to become familiar with each class of microphone and all of the subcategories within. We will go through these classifications one at a time, becoming familiar with their nuances in coming posts.

     

  • Microphone Preamplifiers for Beginners

    Microphone preamplifiers strengthen a microphone’s signal, so that the signal might be used by other audio equipment. On their own, most microphones do not produce a strong enough signal for recording devices or mixing consoles to use without sacrificing quality. Microphone preamplifiers improve a microphone’s signal, bringing it up to line-level quality, which is the signal-strength level that most sound engineering devices require.

    Microphone preamplifiers are also referred to as microphone preamps, mic preamps, preamps, and mic pres.

    History of Preamps

    As with all electronics, the first microphone preamps were much larger and less sophisticated than modern-day models. Preamps from the 1940s were characterized as large, temperamental tubes that would hiss and hum – sometimes ruining an entire take. Over time, preamps were upgraded. Quieter metal films replaced carbon resistors, and polypropylene capacitors replaced old, paper versions. The electrolytic filters decreased in size. Thanks to decades of improvements, the preamps available today are much smaller and produce better sound that the first vacuum-tube preamps.

    Types of Transformers

    There are two categories of microphone preamps: solid-state and tube. Solid-state preamps have transistors or op amps within them. (Op amps contain integrated circuits and several transistors). These are designed to be cleaner than tube models, adding less un-wanted noise but producing a more sterile sound. Tube preamps offer a more natural tone, but they can introduce noise into the sound stream. Some manufactures produce preamps that are solid-state, but contain a tube; this is an attempt to merge both types’ desirable qualities.

    Both solid-state and tube mic preamps can come with or without a transformer. Transformers have two coils in them, which do not completely touch, creating some insulation. Preamplifiers with transformers can be useful in situations where there is high interference.

    When selecting a preamp and considering whether to purchase one with a preamp, one fo the most important considerations is the output impedence of the mic and the input impedence of the preamp. If these match perfectly, there will be no EQ effect (equalization effect); however, any slight difference will result in an EQ effect.

    How Preamps Work

    The output of a typical microphone is low, often less than 100 microvolts. A preamplifier increases the sound by as much as 70 dB, up to 10 volts. At this level, audio mixers and other external equipment is able to process the sound.

    The Unique Sound of Preamps

    Solid-state preamplifiers are designed to eliminate unwanted noise, but even at the cost of creating a shallow sound. Tube preamps, on the other hand, produce a richer tone, which enhances the musical qualities of a recording or live performance.

    Each preamplifier alters sound uniquely. Some force microphones to alter the quality of sound they produce, by loading them with low impedance. Others add their own characteristics to the sound, before sending it onto the preamplifiers that are built into an audio mixer.

    Who Uses Preamps

    Preamps are used by audio engineers, audio mixers and anyone else who produces recordings. People who work on large-scale projects often select tube preamplifiers with excellent transformers, as these produce a rich, clear sound. Those who are on a tighter budget, though, often opt for less expensive equipment, such solid-state preamplifiers that do not have transformers.

    Tubes and transformers can greatly help a musical recording. Purchasing cheap equipment, though, usually negatively impacts the sound produced. Most audiophiles would rather use the best solid-state preamps that do not have preamps than cheap tube preamps with transformers. If one can afford to invest in high-quality tube preamps and transformers, however, it is often advisable.

    Advantages and Disadvantages of Preamps

    Solid-State Preamps:

    • Cost less
    • Do not introduce noise
    • Produce a sterile sound

    Tube Preamps:

    • Cost more
    • Can pick up noise
    • Create a more robust tone

    Transformers:

    • Are useful in high-interference settings
    • Cheap ones usually produce poor-quality sound

    Preamps Available Today

    There are many manufacturers of preamplifiers, which range in price.

    Burl Audio’s B1D Microphone Preamp and DI is an inexpensive preamp and DI box. It comes with both an input and output transformer, as well as a capacitor-free circuit path. The gain of 70 dB is standard within the industry. This is an excellent model for musicians just starting out, who have to watch their expenses.

    On the other end of the price spectrum, the GainStation8 offers superb quality in both studio settings and live performances. With 60 volts, it provides an excellent gain of 130 dB. This strength helps in live situations, where signals must often travel significant distances.

    In between these two extremes, the Rupert Nerve 5032-H Single Channel Mic Preamp and 3 Band Equalizer (EQ) is a great value. This single-channel preamp and EQ provide quality to please the most picky audiophiles, while also appeasing budgets.

    Glossary of Common Features

    Ammount of Gain: The amount of gain is how much a preamp strengthens the sound.

    Roll-Off Impedance: Roll-off impedance is the level at which there is a sudden increase in impedance.

    DI: A DI box connects high-impedance, unbalanced signals to the low-impedance, balanced input of some equipment.

    Mic/Line Level: Line level is the strength at which most audio equipment can process a signal. Mic level, which is much lower, is the output level of a microphone.

    Class-A: Class-a preamps are constantly on, which is inefficient but produces excellent sound.

    Class-AB: Class-ab preamps turn off one side of the preamp, saving energy.

    Multi Channel: Multi-channel preamps can handle multiple signals at once.

    Channel Strip: Some preamps are part of a channel strip, which also can include compressors, noise gates, equalization (EQ) and enhancers.

  • Mix Engineer Gary Noble Talks about Preproduction

    So we were romanticizing about the old days of tape and talking about working with top tier clients. Guys and galls who would come in uber prepared and crank stuff out with a quickness. If you have experience with session musicians that you likely now what I am talking about. Miami has it’s stable of session guys, but then it has a LOT of hip hoppers, hobbyists, and drug dealers. I have been in some raucuss sessions in a cloud of smoke behind an ssl board in writing sessions which may get a verse of rap done in 6 hours.