Book a 30 minute session with Joshua Lewis to go over this amazing business opportunity! Check your email for a fantastic overview of what this business can do.

[vc_row][vc_column][vc_video link=”https://youtu.be/-XuHbj_63cY” align=”center”][/vc_column][vc_column][vc_column_text]
I really enjoyed this run-through of Mr. Renegade El Rey’s method for producing polished Rap vocals. I have been mixing hip hop for a LONG time, and was able to learn a few new ways to look at things, which was incredibly helpful.
Renegade is a natural teacher! Let’s go over some of the juicy knowledge that he drops, in the following timeline.
Creating the Hook: Stacking Vocals – He talks about determining how “fluffy” or thick a hook needs to be. He usually stacks 4 vocals for the same part. He busses his vocal hook tracks to an aux, choosing to do this so that he can affect the group of tracks, and still maintain the option of further affecting the tracks individually.
He chooses to pan two tracks dead center and two tracks out to the left and right 80%. What I found cool is that he chooses NOT to pan out fully (100% Left-Right) because he feels that this separates the tracks too much and removes the cohesiveness that he is going for. It makes sense!
The center double and two panned takes are significantly lower than the main, centered lead (between 15-18db lower!). This ads amazing nuance!
[/vc_column_text][vc_column_text][rml_login][/vc_column_text][vc_column_text]
In his verses, he only stacks two vocal tracks, with a 16db difference in level. and uses a Renaissance Compressor to level things out first. He busses these leads to an Aux track where he applies Compression (Renaissance Compressor), Equalization (Renaissance EQ), and De-essing ( Ren Deeser). Does the order matter?
Yes it does! He likes to level things out with a ratio of 4:1, lowering the threshold to get no more than 4 dB of reduction (fast attack, medium release). He is right to mention that this compressor gives warmth and body, in addition to better leveling.

He then brightens things up, or polishes to a nice sparkly shine, with Renaissance EQ. He rolls off from the male fundamental frequency of about 150Hz, boosts some of the meat and potatoes (thickness) at 400Hz, slight.

Any added siblance added by the eq, he then tames with a Renaissance De-Esser. As he rightly suggests, a De-esser is a “cousin” of the compressor, in that it is a frequency dependent compressor. Two much will make the vocal sound muffled, and gives the vocalist a magnificent lisp, so the goal is to do only as much as needed. He usually chooses 11kHz as his target frequency and lowers threshold judiciously, he will then shift the frequency around some more just to see if things can be approved upon. The range of choices is usually between 7kHz and 13kHz.

And what about those critical ad lib tracks? He uses the Waves Q10 Eq to find the frequency in these ad-libs that should stand out to make the track stand out, however prevents them from being “in the way.” By taking a medium Q’s boost, he sweeps to find this frequency, the experiments with Q to see what works.
Reverb and Time based Effects:
He is going with a Renaissance reverb, for a spacey vibe. Not wanting his time to be too, long, he wants it to be felt, but not clearly heard. He solos his vocal track with reverb. As with custom, he has his reverb and delay on auxes, set to 100% wet, Yes…..no time based effects as inserts usually. Timing for both the reverb and the delays are rythemically set. He is smart to roll off low end on his H-Delay to prevent delays from muddying the track. He gets the roll off right by listening to the delays louder in the mix than he would later have them sit, and thinning them out appropriately, he then lowers the send level to place them properly.
I really enjoyed watching RENEGADE EL REY break down his mixing technique, in very clear, step-by-step terms. It is important to note that he does indeed CHOOSE to use Waves Renaissance plugins, which are included in most of the higher tier Waves bundles. It seems like he makes this choice based upon the color, flexibility, and ease of use available in these truly classic and timeless tools.[/vc_column_text][vc_column_text][/rml_login][/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]
I usually don’t like these type of plugins that are not traditional compressors, equalizers, etc. I do like the idea behind CLA drums however as there are many parameters and ways to alter the sound which are non traditional.
https://littlefishaudio.wistia.com/medias/j6xrsrhj5r?embedType=async&videoFoam=true&videoWidth=640
To purchase: Waves CLA Drums
Lucas really has an ear for mixing! This video is a fantastic example of what works on Hip Hop drums.
https://littlefishaudio.wistia.com/medias/toye8uq8gh?embedType=async&videoFoam=true&videoWidth=640
Trim before. IK Multimedia T-Racks Quad Image to keep mono kick. Slate VariMu on Kick Sound Toys Decapitator on Kick Waves V-Comp on claps MS Dynamic technique on Clap Eq Brainworks bx_Dyn EQ v2 to remove harshness Softube Passive Eq lifting 700k on Clap to give it more body. Great use of Avid Lo-Fi to fatten up Snare Waves H-EQ to really even out the tone and make it live in the groove. SoundToys EchoBoy slap on Snare as a thickening agent Avid Lo Fi on high hats to give them more body. Air Kill Eq on High Hats Avid DVerb to place the High Hats in the room.
Lucas is able to set his mix up for success by using some common, and not so common, methods of getting his session organized to facilitate a smooth mixing workflow.
Pay special attention to his use of trim, at the beginning of his plugin chain, so as not to overload any of the plugins and get into nasty territory.
https://littlefishaudio.wistia.com/medias/awdr2l586l?embedType=async&videoFoam=true&videoWidth=640
Brom uses Audio Ease Altiverb to really give these vocals a nice, subtle polish. You can feel the depth and expansiveness of the vocals, while still getting them “up-front” and present.
https://littlefishaudio.wistia.com/medias/jw8k6qenz0?embedType=async&videoFoam=true&videoWidth=640
I love the way Eric Tarr dials in frequency specific compression to tame something that I only noticed when he mentioned it. Plosives, which start with a “B” or “P” sound can be annoying. Here is an industry trick which you need in your arsenal! The perfect tool for this trick is the Waves C1 Compressor Side Chain.
https://littlefishaudio.wistia.com/medias/r4emaafbfk?embedType=async&videoFoam=true&videoWidth=640
https://littlefishaudio.wistia.com/medias/uzxhvyvird?embedType=async&videoFoam=true&videoWidth=640
Is there a better place to perfect the groove, vibe, and danceability of a track than the drums?
I absolutely love the way that Lucas makes very clever use of compression, distortion, parallel processing and some saturation.
Products used for instruction:
Brainworks VSC-2
T-Racks Black 76
UBK-1
Let us know what you think and PLEASE share!
We love the McDSP 6050 Ultimate Channel strip plugin for its versatility. This video is a good example of how to make programmed drums sound more life like.

Revisiting Recording Fundamentals
I decided to start getting some of the things that I have learned over the years as a professional recording engineer down on paper (and video). It seems like there is more confusion and lack of direction in the “studio” these days than at any other point in time. The reasons for this could use their own article and video series. I won’t belabor these points however. I would rather be a part of the solution to this problem.
Some people might argue that the art form of recording music (The Recording Arts) is going the way of the Dodo. My view is that any real and useful education in recording must include a thorough understanding of the fundamentals of classic recording technique. What issues did the original lab coat wearing recording engineers (with degrees in electrical engineering) face? How did they overcome these obstacles to capture timeless recordings? Is this hard won knowledge of value to us today?
The limitations of technology for early recording engineers were such that track count was limited. Perhaps one track was at their disposal! Mono. No panning. No blending of elements with faders. The entire recording needed to be captured with ONE microphone. How might this be done to maximize the quality of the recording, blend of instruments, and overall fidelity of the recording. In short, the entire success of the recording came down to mic selection, and mic placement. Because their was only one microphone and one track, capturing many instruments playing at the same time, the following conditions were absolute in importance:
Points 2 and 3 are within the recording engineers domain, and are of paramount importance today, just as they were way back when.
Why is microphone choice and placement of core importance to making recorded music?
Please checkout my video on microphone placement, which illustrates how mic choice and placement impact the sound of your recording. Please comment below on your findings with mic choice and placement below!
http://littlefishaudio.wistia.com/medias/1onf62grod?embedType=async&videoFoam=true&videoWidth=640