Tag: compression

  • Drum Mixing – Emphasis on Hip Hop

    Lucas really has an ear for mixing! This video is a fantastic example of what works on Hip Hop drums.

    https://littlefishaudio.wistia.com/medias/toye8uq8gh?embedType=async&videoFoam=true&videoWidth=640

    
    
    
    
    Trim before.
    IK Multimedia T-Racks Quad Image to keep mono kick.
    Slate VariMu on Kick
    Sound Toys Decapitator on Kick
    Waves V-Comp on claps
    MS Dynamic technique on Clap Eq Brainworks bx_Dyn EQ v2 to remove harshness
    Softube Passive Eq lifting 700k on Clap to give it more body.
    Great use of Avid Lo-Fi to fatten up Snare
    Waves H-EQ to really even out the tone and make it live in the groove.
    SoundToys EchoBoy slap on Snare as a thickening agent
    Avid Lo Fi on high hats to give them more body.
    Air Kill Eq on High Hats
    Avid DVerb to place the High Hats in the room.
  • Drum Buss Compression – Distortion – Parallel Processing (UBK1, Black76, Vertigo VSC2)

    https://littlefishaudio.wistia.com/medias/uzxhvyvird?embedType=async&videoFoam=true&videoWidth=640

    Drum Buss Mixing

    Is there a better place to perfect the groove, vibe, and danceability of a track than the drums?

    I absolutely love the way that Lucas makes very clever use of compression, distortion, parallel processing and some saturation.

    Products used for instruction:

    Brainworks VSC-2
    T-Racks Black 76
    UBK-1

    Let us know what you think and PLEASE share!

  • DBX Compression – 38 years “Over Easy” compression. Can I now replace my DBX 160 VU with the UAD DBX 160 vu Model?

    I began learning recording technique as an intern, assistant, and engineer at Studio Center recording studios in miami, Fl starting in june of 2002. The first compressor that I was quickly able to get fantastic results with was the DBX 160 VU. At the time it was hard wired to a Demeter VTMP tube preamp. I remember the combination sounding much larger than life, “in your face” (for lack of a better term) and exactly what the doctor ordered on most of the rappers that I was recording. I could quickly dial in intimacy or aggression for vocals, bass, and some guitar parts. This compressor has always remained one of those hardware pieces that is so good at what it does, that it has not been worth replacing with an emulation, even though they now go for roughly $800-$1100 per channel. This compressor had a attack and release settings which were determined by the rate of change of the program material itself: as the compressor traced the sound envelope it would adjust attack and release time allowing the engineer to focus on hearing compression (ratio) and amount of gain reduction. The innovation that makes these DBX compressors so smooth is the “Over Easy” initiation of compression, was introduced with the easing in of compression slowly with the softer knee of the compressor. Because I also own the 165, 160sl and several software models including Universal Audio 160VU I wanted to do gain matched, identical setting comparisons to get as close to an apples to apples comparison, to see if I could afford to replace these two beauties. What do you guys think based upon the following clips!? Keep em or lose em?

    Feel free to import the clips into a session to listen at your own leisure.
    Here is the PDF Manual for the original 160 VU.
    dbx_160

    Josh Lewis

  • Compression Tutorial Videos: Learn how to mix with Compression

    [youtube=http://www.youtube.com/watch?v=JU9ja60JNcw&feature=share&list=PLhdeKtcwASnBjhPVhczf_Kfyz1FUBrLoN&index=1]

    It has taken me years to begin to feel somewhat comfortable using one of the most essential tools in the recording engineers arsenal: Compression. There is no way to get that hyper present, in your face quality in modern music without it. Learning to shape sound envelopes, controlling dynamics, to maximize impact takes a lot of trial and error. Learn Compression Ratio, Threshold, Attack Release, and the characteristics of different compressor/limiter topologies.

  • Compression for mixing: Relating to its use as an ADSR envelope shaper

    Basic compression tip: Thinking of a compressor as an ADSR (Attack Delay sustain release) envelope shaper. Look at the blobs of sound on the track you would like to reshape with a compressor. 1) With selector tool measure how long the sound takes to get from zero to peak in milliseconds. Set your compressors attack to this time. 2) Now, measure how long it takes this blob to decay. Set your release to this time. You have now defined your sounds envelope. 3) Now choose what you will be using to shape the envelope: a sledgehammer (Ratio of 8:1 or greater) or a sander (1.5:1-4:1). 4) Choose the force with which you will be using this tool by dialing in your threshold. Lower it for greater compression. 5) Make up gain: Look at gain reduction meter and raise the gain somewhat to make up for the loss in level. Good job! Now you may shape envelope further by adjusting your attack and release settings. Release will only need to be shortened usually.

  • Compressor or equalizer first?

    When using compression and EQ together on the same source, which one should I put first? You should try it both ways and pick which sounds better to you, but here is the basic philosophy: Compressor’s try to turn down louder signals, right? So boosting frequencies before a compressor, will inevitably cause the compressor to react more easily, because the signal will have become louder going into the compressor. For example, boosting 60 Hz on a kick drum and then compressing it will likely just cause the compressor to react much more. You may like the sound of this, and it might be exactly what you’re looking for – if so then that’s great. However by compressing the signal first, you can even out the dynamics of the sound first, and then you can sculpt the sound with EQ afterwards without affecting the dynamics of the signal. I generally cut frequencies that are not part of the overall timbre of sound I am looking for and then will either use compression as a leveling device or perhaps more of an effect that changes the envelope of the sound. YMMV.