Radial JDX 48 Reactor Guitar Amp Direct Box

$199.99

Radial JDX 48 Reactor Guitar Amp Direct Box

SKU: R800 1402 Categories: ,

JDX 48™ Reactor™ Guitar Amp Direct Box

Part No. R800 1402 

  • Captures sound of both the head and the cabinet
  • Delivers consistent tone – show after show
  • Works equally well on electric guitar and bass
  • Can be used with 48V phantom power or DC supply

The Radial JDX 48 Reactor is a direct box designed to capture the explosive dynamics and warmth of an electric guitar amplifier by connecting between the guitar amp head and speaker cabinet. This delivers a sound that is similar to a well-placed microphone while eliminating the frustrating inconsistencies.

The design begins with 100% discrete class-A circuitry and a transformer-coupled ‘reactive load’ that captures both the sound from the amp head along with the back electromagnetic impulse from the loudspeaker. This produces a more realistic rendering than the usual resistive pad offered by other manufacturers. The signal is then processed via a carefully designed multi-stage filter to emulate the tone of a 4×12 half stack cabinet.

In use, the JDX 48 delivers greater consistency over a typical microphone as irregularities such as mic placement and varying acoustics no longer play the dominant role on stage. This is most appreciated when using in-ear monitors as the tone remains consistent from one show to the next, resulting in shorter setup times and a more comfortable audio feed for the artist.

Although originally designed for guitar, the JDX has also become a favorite on bass. The clarity and punch in the lower midrange delivers a tone that is reminiscent of an Ampeg SVT connected to an 8×10 cabinet. On guitar it sounds as if you have a Shure SM57 in front of a Marshall half-stack. This new version also offers greater power handling for 300 watt amps and extended low end for deep bass frequencies.

The JDX 48 Reactor… the most natural sounding amp DI ever!

 

Specifications  
Specifications are subject to change without notice.
Audio circuit type: Discrete Class-A – Transformer Isolated
Frequency response: Shaped for guitar use
Dynamic range: 114dB
Noise floor: -100dBu below 0dBu
Maximum input: 120W @ 8Ω
Maximum output: +14dBu (clip level)
Thermal input limit: +49 VAC (from amplifier)
Total harmonic distortion: <0.015% (+10dBu input @ 1KHz)
Inter-modulation distortion: 0.03% (+10dBu input @ 1KHz)
Input impedance: 15kΩ
Output impedance: 2kΩ (XLR out)
Features  
Bass extension: Lowers frequency response for bass guitar
300 Watt amp: Increases power handling from 100W to 300W
180° polarity reverse: Inverts signal polarity at the XLR output
Ground lift: Shunts ground via a resistive network
Filter: Active speaker emulation band-pass filter
XLR configuration: AES standard (pin-2 hot)
General  
Power: 48V phantom or +15VDC/400mA adapter Included 
Construction: 14 gauge steel chassis and outer shell
Finish: Durable powder coat
Size: Size: 5″ x 6.25″ x 2″ (127 x 159 x 51mm)
Weight: 2.80lbs (1.28 kg)
Warranty: Radial 3-year, transferable

Brand

Radial

Radial
Weight 15 lbs
Manufacturer

Condition

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

A link to set a new password will be sent to your email address.

Continue as a Guest

Don't have an account? Sign Up