Category: Mix theory

  • Drum Buss Compression – Distortion – Parallel Processing (UBK1, Black76, Vertigo VSC2)

    https://littlefishaudio.wistia.com/medias/uzxhvyvird?embedType=async&videoFoam=true&videoWidth=640

    Drum Buss Mixing

    Is there a better place to perfect the groove, vibe, and danceability of a track than the drums?

    I absolutely love the way that Lucas makes very clever use of compression, distortion, parallel processing and some saturation.

    Products used for instruction:

    Brainworks VSC-2
    T-Racks Black 76
    UBK-1

    Let us know what you think and PLEASE share!

  • Making Programmed Drums Come to Life with a channel strip – McDSP 6050 Ultimate channel strip

    We love the McDSP 6050 Ultimate Channel strip plugin for its versatility. This video is a good example of how to make programmed drums sound more life like.

     

  • Soundtoys Decapitator, Ubk-1, Vertigo VSC-2 and more…..Compression for drums

    Lukas Rimbach was kind enough to lend us a hand by doing a video giving great pointers on how to treat Drum Bus.
    I love these subtle and not so subtle ways of introducing compression in parallel and directly to the signal as an insert.
    Product used:
    Kush UBK-1
    Vertigo VSC-2
    IK Multimedia T Racks 1176 and Fairchild
    Sound Toys Decapitator

    1 Drumbus Comp LR Audio.mov from joshlew on Vimeo.

  • Compression Tutorial Videos: Learn how to mix with Compression

    [youtube=http://www.youtube.com/watch?v=JU9ja60JNcw&feature=share&list=PLhdeKtcwASnBjhPVhczf_Kfyz1FUBrLoN&index=1]

    It has taken me years to begin to feel somewhat comfortable using one of the most essential tools in the recording engineers arsenal: Compression. There is no way to get that hyper present, in your face quality in modern music without it. Learning to shape sound envelopes, controlling dynamics, to maximize impact takes a lot of trial and error. Learn Compression Ratio, Threshold, Attack Release, and the characteristics of different compressor/limiter topologies.

  • Compression for mixing: Relating to its use as an ADSR envelope shaper

    Basic compression tip: Thinking of a compressor as an ADSR (Attack Delay sustain release) envelope shaper. Look at the blobs of sound on the track you would like to reshape with a compressor. 1) With selector tool measure how long the sound takes to get from zero to peak in milliseconds. Set your compressors attack to this time. 2) Now, measure how long it takes this blob to decay. Set your release to this time. You have now defined your sounds envelope. 3) Now choose what you will be using to shape the envelope: a sledgehammer (Ratio of 8:1 or greater) or a sander (1.5:1-4:1). 4) Choose the force with which you will be using this tool by dialing in your threshold. Lower it for greater compression. 5) Make up gain: Look at gain reduction meter and raise the gain somewhat to make up for the loss in level. Good job! Now you may shape envelope further by adjusting your attack and release settings. Release will only need to be shortened usually.

  • Compressor or equalizer first?

    When using compression and EQ together on the same source, which one should I put first? You should try it both ways and pick which sounds better to you, but here is the basic philosophy: Compressor’s try to turn down louder signals, right? So boosting frequencies before a compressor, will inevitably cause the compressor to react more easily, because the signal will have become louder going into the compressor. For example, boosting 60 Hz on a kick drum and then compressing it will likely just cause the compressor to react much more. You may like the sound of this, and it might be exactly what you’re looking for – if so then that’s great. However by compressing the signal first, you can even out the dynamics of the sound first, and then you can sculpt the sound with EQ afterwards without affecting the dynamics of the signal. I generally cut frequencies that are not part of the overall timbre of sound I am looking for and then will either use compression as a leveling device or perhaps more of an effect that changes the envelope of the sound. YMMV.

  • Do I need to put a compressor across the mix buss?

    Many people do, but there are many different approaches to this, and the main key here is to use your ears. Try it! Virtually all music that’s commercially available today has been compressed at least a little bit while mixing, and again at the mastering phase. Every genre of music is different though, and the same mix compression applied to a Rock, Jazz, and Electronic song will obviously have vastly different results. No matter what you do though, take it easy. Compression is nearly impossible to un-do, and it’s very easy to ruin a mix by over-compressing. It’s not always wrong to compress heavily, but it must be done skillfully and carefully. Make sure the compressor is set to unity gain, and try some gentle settings. For starters, you can try a fairly low ratio (4:1 or lower), attack time of 30ms, and a release time of 20 ms. Keep an eye on the meter, and take care that the gain reduction is 2-3 dB maximum for the loudest peaks. Bypass it, put it back in, and repeat. Adjust until it sounds good to you, but remember…when in doubt, leave it out. Some gear to use judiciously on the mix buss might be, Summit DCL 200, Chandler TG1, Maselec MLA-2, and Elysia Xpressor.